Housing & installation
Envelope, mounting pattern, finish, markings and connector placement.
ISOLATED DC–DC · COMPACT
PDG Isolated DC–DC Compact
Our product · CustomizableBidirectional DC power transfer with galvanic isolation, packaged for fixed installation in your equipment.
- Bidirectional DC A ↔ DC B power transfer
- Galvanic isolation between the DC ports
- Compact housing with mounting feet
- CAN control and diagnostic integration
Product reference: PDG-ISO-DCDC-COMPACT · Price and lead time on request
| Conversion | Isolated, bidirectional DC–DC |
|---|---|
| Power-stage reference | Up to 50 kW; continuous enclosed-unit rating is configuration-dependent |
| DC port range | 200–950 V DC on each side; approximately 1:1 conversion ratio |
| Current reference | Up to ±60 A per DC port, within the power and thermal limits |
| Peak stage efficiency | 98.7% at 950 V / 50 kW reference operating point |
| Control supply | 24 V DC nominal; 20–28 V reference range |
| Communication | CAN 2.0B, 500 kbit/s |
| Stage protection | Overvoltage, overcurrent, overtemperature and external interlock |
The isolated stage transfers power at approximately 1:1 voltage ratio. Wide-range output-voltage regulation and load-current limiting require a coordinated additional conversion stage; specify these functions when requesting a configuration.
CUSTOMIZATION
Adapted to your application.
Power & thermal design
Operating voltage and power envelope, cooling arrangement and optional regulation stage.
Control & integration
CAN signal mapping, supervisory control, interlocks, harnesses and diagnostics.
APPLICATIONS
Designed into your system.
- Isolated DC buses
- Battery and energy-storage integration
- Vehicle and cabinet power systems
DEFINE YOUR PDG PRODUCT
Discuss customizationTell us what your platform needs.
Share the operating requirements, available space, cooling, interfaces, quantity and qualification needs. We will define the product configuration and quotation with you.
OUR PDG PRODUCTS
More PDG products.
Power conversion, battery systems, cabinets, displays and monitoring, configured for your application.
PDG · Customizable
PDG AC–DC Rectifier
An active-front-end rectifier in a desert-sand enclosure, with CAN control and configurable AC, DC and cooling interfaces.
View product & specifications
PDG · Customizable
PDG DC–AC Inverter
A configurable DC–AC inverter in a graphite enclosure for battery, DC-bus and AC-generation applications.
View product & specifications
PDG · Customizable
PDG Isolated DC–DC with Handle
Bidirectional isolated DC–DC conversion with a carry handle, mounting feet and customizable power and control connections.
View product & specifications
PDG · Customizable
PDG HMI-5
Fully customizable 5-inch operator display. Housing design, colour, mounting, controls, graphical interface and application software are adapted to your product.
View product & specifications
PDG · Customizable
PDG Safety Monitoring System – Sensor Control Unit
A configurable 24 V sensor control unit for cabinet temperature, humidity and water-leak monitoring, with CAN, Ethernet and RS-485 integration.
View product & specifications
PDG · Customizable
PDG 19-inch Power Rack – 24V - 28V / 1.8 kW
A customizable 19-inch AC–DC power rack with a 24V - 28V DC output range and a 1.8 kW design target, with a front display and physical controls.
View product & specifications
PDG · Fully customizable
PDG Configurable Battery Packs
Fully customizable modular battery packs with voltage configurations from 38 V to 900 V DC and energy capacity up to 18 kWh, depending on the selected configuration.
View product & specifications
PDG · Fully customizable
PDG Battery Charger Cabinet with HMI-5
Fully customizable battery charger cabinet with a product-specific PDG HMI-5 housing, colour, controls and graphical interface. Charging ratings and interfaces are defined for your application.
View product & specifications
PDG · Fully customizable
PDG Equipment Cabinet with Integrated HMI-5
Fully customizable equipment cabinet with a PDG HMI-5 tailored to the product. Cabinet layout, display housing, colour, controls and graphical interface are defined for your application.
View product & specificationsIllustrative configurations. Final ratings, interfaces and qualification scope are agreed in the quotation.